A magnitude 3.4 earthquake struck approximately 11 kilometers southeast of Huntsville, Utah, early Sunday, Nov. 15, 2026, at a depth of 5.4 kilometers, according to the U.S. Geological Survey. The tremor, which occurred at 1:40 a.m. UTC, was recorded by 52 stations.
Seismic Event Details
The earthquake, which the U.S. Geological Survey reviewed, originated at 1:40:03.330 UTC on Nov. 15, 2026. While the magnitude was calculated at 3.42 ml with an uncertainty of ± 0.1, the USGS noted the location was 11 kilometers southeast of Huntsville at a depth of 5.4 km with an uncertainty of ± 0.8 km.
The Intermountain Seismic Belt
The tremor occurred within the Intermountain Seismic Belt (ISB), a prominent north-south-trending zone of recorded seismicity in the Intermountain West. This zone includes the Wasatch Front urban corridor. According to the U.S. Geological Survey, the ISB is characterized by movement along north-trending, east- and west-dipping range-bounding normal faults that result in horizontal extension.
Geological Context and Faults
The ISB in northern Utah coincides with a transition between east-west-directed stretching in the Basin and Range to the west and a more stable area of the Middle Rocky Mountains to the east. While the region contains the Wasatch fault—Utah's most active fault based on geological evidence—many small- to moderate-sized earthquakes in the ISB cannot be associated with recognized geologically young faults. This is due to the superposition of late Cenozoic stretching upon older thrust-belt structures, including buried faults that have no surface expression.
Potential for Ground Shaking
Geologists note that the potential for movement on certain faults to cause strong ground shaking is less well understood but is likely low. However, because moderate and large earthquakes are likely in the region, expected levels of strong ground shaking remain high. A magnitude 5 earthquake can cause significant damage at distances up to 10 kilometers (6 miles), while a magnitude 7 can cause damage at distances up to 50 kilometers (30 miles) or more. Additionally, geologic site conditions, such as deep sediment-filled basins, can locally amplify and prolong ground shaking.
Recent Regional Seismic Activity
The recent seismic activity in the Huntsville area follows a history of regional tremors. According to the University of Utah Seismograph Stations, a magnitude 3.4 earthquake was recorded on Nov. 14, 2026, at 6:40 PM, located 7 miles southeast of Huntsville, UT. This event was preceded by various smaller tremors across the state, including a magnitude 2.1 earthquake on Nov. 13, 2026, at 9:00 PM located 9 miles north-northeast of Milford, and a magnitude 1.9 earthquake on Nov. 13, 2026, at 11:14 AM located 9 miles north-northeast of Milford.
Historical Earthquake Trends
Historical seismicity in the region dates back to the 1850s, while a modern catalog of instrumentally located earthquakes in Utah began in mid-1962. The U.S. Geological Survey reports that in the Intermountain Seismic Belt, M5 or larger earthquakes occur at an average rate of about one every 10 years, and M6 or larger earthquakes occur about one every 50 years. The largest historical earthquake in the region was the 1934 M6.6 surface-faulting earthquake in Hansel Valley, located north of the Great Salt Lake.
Ongoing Monitoring
The U.S. Geological Survey noted that most small- to moderate-sized earthquakes in the ISB cannot be associated with recognized geologically young faults. The agency continues to monitor the region, which includes several active fault lines such as the Wasatch fault, which has had relatively little historical seismicity despite being Utah's most active fault based on geological evidence.