THE WIRE · UPDATED 12:16 AM MDT No story is too small.
Official SourceCedar City

ITB MRB26-1020 Main Rotor Blade

Utah.News 1 source cited 1 primary Primary: suu.edu Details

How this story was published

Published automatically from one public source cited; not yet reviewed by the desk. Tell us if something is wrong ↗

Primary source

suu.edu — an official government, school or university source.

Utah.News publishes every story with the sources it was built from. Questions or a correction: corrections@utah.news.

Official source This story comes from an official government or institutional source.
A formal document folder and a fountain pen on a dark wooden desk, symbolizing official procurement and bidding processes.
Photo via AI illustration

Purchasing Office

October 20, 2026

Invitation to Bid

ITB MRB26-1020

Main Rotor Blade

Southern Utah University is requesting bids from qualified sources to provide one (1) serviceable

helicopter main rotor blade, based on the information provided in this document. Bids will be

received via email (tannergale@suu.edu) OR in the Southern Utah University Purchasing Office,

attn. Tanner Gale, Campus Services 316, 351 West University Blvd., Cedar City, Utah, 84720,

no later than 2:00PM (MT) Thursday, October 29, 2026. At this time, a list of the names of the

firms submitting bids will be available. No other public disclosure will be made until after award

of the contract.

Southern Utah University is located in Cedar City, Utah. We are a state institution, committed to

undergraduate, professional graduate, and applied technology programs of excellent quality. The

University enrolls over 13,000 students and employs more than 1000 faculty and staff. Founded

in 1897, SUU is located on a main campus of 130 acres in Cedar City, Utah, about 2 ½ hours

north of Las Vegas on Interstate 15, in the geographic area of Utah’s National Parks.

Please note bids must be received, either mailed, emailed, or hand delivered, in the Southern

Utah University Purchasing Office, attention Tanner Gale, by the bid deadline listed below.

Bids received late will not be considered. Questions concerning this bid can be directed to

Tanner Gale, Purchasing Office.

Tel: (435) 586-7713 – Email: tannergale@suu.edu

Bid Deadline: 2:00PM (MT), Thursday, October 29, 2026

All questions & bids must be submitted in writing to:

Southern Utah University

Purchasing Office Attn: Tanner Gale

Campus Services 316

351 West University Blvd.

Cedar City, Utah 84720

Email: tannergale@suu.edu

Please Note: Email preferred

General Information

1. All bid information is to be held in strict confidence. SUU reserves the right to accept or reject

any or all bids or waive any informalities or technicalities in any bid in the interest of the

University.

2. Awarded contracts are subject to our terms and conditions, which can be found at

https://www.suu.edu/ad/purchasing/forms.html

3. Bids will include all charges (freight, etc.) – Any additional charges, fees, and costs not

included in your bid will not be accepted.

4. Any Addenda issued during the time of bidding shall become part of the contract documents

made available to all bidders for the preparation of the bid.

5. The procurement laws of the State of Utah and the University’s Purchasing Policy govern this

request. Policies and rules are available upon request.

6. Whereas Contractors/Vendors may have provided budgetary proposals to the University

regarding this project, this Invitation to bid supersedes all other requests. Bidders must respond

to this request and any proposals, bids, or quotes provided prior to this request cannot be

considered.

7. Award shall be made to the responsive and responsible contractor whose submittal is determined

to be the most advantageous to the University taking into consideration the evaluation criteria set

forth in this solicitation.

Pricing, although a consideration, shall not be the sole determining factor.

Evaluation Criteria – Invitation to Bid shall be evaluated based on the following criteria:

Experience, Performance ratings, Inspection, Testing, Quality, Workmanship, Time and manner

of delivery, References, Financial stability, Cost, Suitability for a particular purpose, the

contractor’s work site safety program, including any requirement that the contractor imposes on

subcontractors for a work site safety program.

8. Debarment Clause: Contractor/vendor certifies that neither it nor its principals are presently

debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from

participation in this transaction (contract), by any governmental department or agency. If

Contractor/vendor cannot certify this statement, attach a written explanation for review by the

University. Contractor/vendor must notify the Director of Purchasing within 30 days if debarred

by any governmental entity during the Contract period.

9. In accordance with Utah Statute 63G-27-101, effective May 5, 2021, vendors contracting with the

State to provide a good or service, including supplies, information technology, or construction

services must certify they are not currently engaged in a boycott of the State of Israel and agrees

not to engage in a boycott of the State of Israel for the duration of the contract (if awarded).

Specifications - Scope of Work

#1 Helicopter Main Rotor Blade, Serviceable (Quantity: 1)

- Main rotor (M/R) blade for the University's single-engine Model 407 training helicopter

- Part Number: 407-015-001-137 (required for airworthiness; no substitute part numbers)

- Condition: Serviceable (SV) or better (overhauled or new also acceptable); please state

condition offered

- Must include FAA Form 8130-3 (or equivalent airworthiness release tag) and full

traceability / back-to-birth records

- Please state total time since new (TSN), time/cycles remaining to retirement life, and

time since overhaul, if applicable

- Please state whether the price is outright purchase or exchange (with any core charge and

core return terms)

- Delivery: Southern Utah University, 351 West University Blvd., Cedar City, UT 84720.

Please itemize pricing for each of the following:

- #1 Main rotor blade (unit price)

- Shipping container, freight, and insurance to the address above

- Warranty terms

- Please include copies of the airworthiness tag and blade records with your bid

- Please offer earliest ETA

- Please give itemized pricing and total cost, plus availability

Please Note: SUU is tax exempt and non-profit. The winning vendor will be provided with a tax

exemption certificate upon request.

Watch

Utah News

Article details

CategoryOfficial Source
CityCedar City
ToneNeutral
Report a problem with this story
What's off? Pick any that fit, or just write below.

Every report is read and checked against the story's sources. Your email, if you give one, is used only to contact you about this message and is never shown publicly. Please keep other personal details out of the text. Privacy